Trouble shooting
Cool Partners ApS has a high degree of experience and know-how in trouble shooting. The combination of expert knowledge about compressors, valves, oils, pollution problems and many years of experience in the area make Cool Partners ApS one of the most qualified consultancies for trouble shooting in the industrial refrigeration industry.
Some of the trouble shooting areas where
Cool Partners ApS can use its know-how are:
-
Analysis of compressor break downs; why did it happen and how to prevent it from happening again?
-
Why do valves break, when there should not be reasonable reason for it?
-
Why are there high bangs and noises in systems when hot gas defrosts is initiated?
-
Why are the same valves always leaking in the flanges and what could be done about it?
-
How can pressure spikes of several hundred bar be created in a system and damage valves, pipes, create leaks etc. and how can it be avoided?
-
Analysis of pollution problems based on oil samples.
-
Why do some compressors not meet the expected lifetime of the bearings and valves, and what can be done about it?
-
Why do some systems not meet the design capacity after some years, when the compressors should still be able to handle the capacity, and what can be done about it?
-
Why do some valve systems seem to have more pressure drop in some applications than should be expected and what can be done about it?
- Why do we have rising pressure in our pump separator when hot gas defrost starts, and how can we solve the problem?
